Kyocera TASKalfa Pro 15000c Advanced Operation Manual page 154

Troubleshooting > Troubleshooting When Feeding Paper
Item
Heavy 5
Heavy 6
3
Simplex(DE)
Range Default
0.0 to 6.0 1.0
0.0 to 6.0 1.0
4
Enter the value> [Start] key > [Stop] key.
Check paper creasing
Paper get creased.
1
[Home] key > [...] > [Professional Settings] > [246 Adjust Finisher] > [03 DE] > [01 Paper
Loop1] or [02 Paper Loop2]
2
Adjust the setting value using [+], [-] key and numeric keypad.
The range of the set value is as follows.
Item
01 Paper Loop1 Adjust the paper loop when
printing on single side (odd
page pass).
02 Paper Loop2 Adjust the paper loop when
printing on double side (even
page pass).
3
Press the [Start] key > [Stop] key.
Amount of change
0.5 -6.0 to 6.0
0.5 -6.0 to 6.0
Description
4-51
Duplex(DE)
Range Default
0.0
0.0
Range Default
-10 to 10 -
-10 to 10 -
Amount of change
0.5
0.5
Amount of
change
1 mm
1 mm