Table of Contents
Advertisement
PoE-10 Single-port Power over Ethernet Injector
About Your PoE-10
The PoE-10 Single-port Power over Ethernet injector is a one-port power injector,
designed for use with 10/100 BaseT Ethernet networks. The PoE-10 injects DC
power through the unused twisted-wires (pairs 4/5 and 7/8) of a standard 8-pin
CAT 5 cable. This allows increased flexibility in the locating of a power over
Ethernet (PoE) enabled device by eliminating the need for a nearby power source.
Packaging List
The following items come with your PoE-10.
This User's Guide
One Power Adaptor
One straight-through Ethernet cable
Key Features
One RJ-45, 10/100 Mbps PoE-enabled port.
Ensures a constant power supply to a PoE-enabled device.
Automatically detects if the connected device is PoE-enabled to avoid
sending power to a non-PoE device.
Front Panel LEDs
The LEDs on the front panel of the PoE-10 are shown next.
Description of LEDs
LED
COLOR
PWR
Green
LNK
Green
Rear Panel and Connections
The rear panel and connections of the PoE-10 are shown next. All connections
STATUS
On
Power is being supplied to the PoE-10.
Off
No power is being supplied to the PoE-10.
On
The PWR&DATA port is connected and sending
power to an Ethernet device.
No Ethernet connection is present.
Off
The connected Ethernet device is not
Flashing
PoE-enabled or is malfunctioning.
6
MEANING
Advertisement
Table of Contents
