Parameter Setting Method - Hantek HDG3000B Series Quick Manual

Parameter setting method

7 Parameter setting method
Parameters can be set via the numeric keypad or the knob
complete.
7.1 Numeric keypad
The numeric keypad consists of the following parts:
1. Number keys
Number keys 0 to 9 are used to directly enter the desired parameter values.
2. Decimal point
Press the key to insert a decimal point at the current cursor.
3. Sign key
The sign key "+/ -" is used to change the sign of the parameter. When first pressing
the key, the sign is "-". When pressing the key again, the sign switches to "+".
7.2 Arrow keys and the knob
Arrow keys:
When inputting parameters, the arrow keys are used to move the cursor to select the
currently edited bit.
When editing the file name, the arrow keys are used to move the cursor position.
HDG3000B Quick Guide
14
with the arrow keys to
Copyright © Qingdao Hantek Electronics Co., LTD
EN