Table of Contents
Advertisement
Quick start
1.
Displays the selected channel.
CH1、CH2、CH3
2.
Channel Parameters
Display the waveform parameters of the current channel.
Press the parameter softkey and use the numeric keypad or direction keys and
knob to modify the value. The parameters that can be modified will be highlighted,
and the red background of the number indicates the current cursor position.
3.
Waveform
Display the selected waveform type of the current channel.
4.
Channel Configuration
Displays the output configuration of the current channel, including waveform type,
output impedance, operating mode and output state.
Output Impedance: HighZ (High Impedance) or 50Ω.
Mode: Modulation, Sweep, Burst or Continuous output.
5.
Menu
Displays the operation menu corresponding to the currently selected function. For
example, the function menu of the [Wave] button is displayed in the figure.
4.5
Parameter Setting Method
Users can use the numeric keypad or knob and direction keys to set parameters.
HDG3000C User manual
16
Figure 4.6 User Interface
Copyright © Qingdao Hantek Electronics Co., LTD
EN
Advertisement
Table of Contents
