Operation; Switching On The Appliance - Bosch TCA640 Series Repair Instruction

3

OPERATION

3.1

Switching on the appliance

►
Pull the mains plug out of the cord store at the
rear of the appliance and connect according to
the specifications on the rating plate.
►
Remove the water tank and fill with fresh, cold
water. Observe the "max" mark. Re-attach the
water tank.
►
Fill the bean container with fresh coffee beans.
Preferably use espresso beans or bean mixtures
for fully automatic machines.
Risk of damage!
Do not use coffee beans which have been glazed,
caramelised
containing sugar. These will damage the grinding
unit.
►
Set the mains switch at the back of the
appliance to I.
►
The illuminated ring around the standby button
lights up green.
►
Press standby button.
58300000120060_ARA_en_c.doc – 18.09.09
or treated with other additives
The appliance conducts a self-test,
heats up and rinses.
►
Heating up to standby
temperature
►
Moving the brewing unit to
the upper end position
►
Pump starts, 50 ml of water
are conveyed through the
coffee outlet.
The system is rinsed and heated
up.
►
Brewing unit returns to
basic position
The appliance is ready to use
when the illuminated rings around
the standby button and the coffee
dispensing button are lit green and
a coffee product (e.g. ESPRESSO)
is displayed.
Note:
When the appliance is used for the
first time or if the appliance has not
been used for a prolonged period,
the first cup of coffee still does not
have the full aroma and should
therefore not be drunk.
Seite 5 von 95