Replacing The Front Panel - Bosch TCA640 Series Repair Instruction

6.6

Replacing the front panel

Tools:
►
Torx- screwdriver T10
6.6.1 Procedure:
1. Disassemble the appliance as described in the "General
disassembly" section.
2. Remove the coffee outlet as described in the "Replacing the
coffee outlet" section, points 1. – 6.
3. Undo two Torx T10 screws (1) on the lower front panel.
4. Remove two cover caps (2) from screw holes (3).
5. Push the outlet slider upwards until three screw holes (3) are
accessible.
6. Undo three Torx T10 screws (4).
7. Pull the front panel off forwards and pivot it to the side for
further disassembly.
8. To reassemble, proceed in the reverse order of disassembly
58300000120060_ARA_en_c.doc – 18.09.09
Note!
Make sure that cables or hoses are not jammed or
bend after assembly.
Seite 61 von 95