3.5.4.2
Changing the water filter
►
Screw in a new water filter.
►
Press and hold down button P for at least 3 sec.
►
Select FILTER YES/NEW with the arrow buttons.
►
Press button P to save the setting.
►
Press exit button to return to brewing mode.
►
Press function switch to draw hot water. The appliance rinses
the filter automatically. Water is conveyed into the collecting
vessel (approx. 2 minutes). The water may be a little cloudy,
do not drink it!
►
If the system message PRESS WATER is displayed, press
the function switch again.
The appliance is ready for use.
58300000120060_ARA_en_c.doc – 18.09.09
►
The
appliance
must
switched on and ready to use.
►
Place a vessel with a capacity
of at least 500 ml under the hot
water nozzle.
►
Using
the
screwing
unscrew the water filter in an
anti-clockwise direction.
3.5.4.3
Removing the water filter
be
aid,
►
Select FILTER YES/NEW with the arrow buttons.
►
Press button P until the display flashes.
►
Select FILTER NO/OLD with the arrow buttons.
►
Press button P to save the setting.
►
Press exit button to return to brewing mode.
The appliance is ready for use again.
Check water hardness setting.
►
The
appliance
must
switched on and ready to use.
►
Using
the
screwing
unscrew the water filter in an
anti-clockwise direction.
►
Press and hold down button P
for at least 3 sec.
Seite 16 von 95
be
aid,