3.5
Changing the programming / standard settings
The appliance has been set at the factory so that coffee can be
brewed without any additional programming. To change these
standard settings, use the function buttons under the display.
Before the programming can be changed, the appliance must be in
brewing mode.
While programming, do not switch off the appliance. Otherwise
changes will not be accepted.
3.5.1
Programming
The following settings can be changed:
►
Language
►
Water hardness
►
Water filter
►
Temperature
►
Current time
►
Timer function
►
Energy-saving mode
58300000120060_ARA_en_c.doc – 18.09.09
3.5.2
Displayed language
To change the displayed language to the required national setting:
►
Press and hold down button P for at least 3 sec.
►
Keep pressing button P until the language selection flashes.
►
Select the required language with the arrow buttons.
►
Press button P to save the language setting.
►
Press the exit button to leave language selection.
3.5.2.1
Displayed languages which can be selected
SPRACHE
SPRAK
DEUTSCH
SVENSKA
LANGUAGE
IDIOMA
ENGLISH
ESPANOL
LANGUE
TAAL
FRANCAIS
NEDERL:
LINGUA
JASYK
ITALIANO
RUSSKIY
Seite 13 von 95