Assembling The Belt And Disc Sander - Westfalia 85 46 55 Original Instructions Manual

Assembly
The belt and disc sander is shipped completely in one box.
Carefully unpack the machine and all loose items from the carton.
If any parts are missing, do not attempt to operate the belt and
disc sander until the missing parts are obtained and installed
correctly.
Keep packaging materials out of range of children. There is
danger of suffocation!

Assembling the Belt and Disc Sander

1. Select a suitable work place before using the belt and disc
sander. Your work place should be well illuminated and
enables you attaching a dust collection system or a vacuum
cleaner.
2. Place the belt and disc sander on a workbench or mount the
sander on a table with screws.
3. If it this not possible, use the included rubber feet. If the
rubber feet are not attached, press them from the upper site
of the base through the edge openings.
The mentioned digits refer to the Parts List, Page 29 – 31.
Operation
21