Attaching The Sanding Table For The Belt Sander - Westfalia RBDS-46A Instruction Manual

Stop Screw
for Belt Sander
(56)

Attaching the Sanding Table for the Belt Sander

1. Loosen the locking knob of the table and detach the complete table from the
machine.
2. Loosen the locking screw (Allen head) and flip the belt sander up. After that,
retighten the screw.
3. Attach the complete table to the flipped up belt sander and fix it in place with
the locking knob. Make sure the table does not touch the sanding belt. The
distance must be between 1.5 – 2 mm.
Locking Pin /
Hole
Operation
Locking Knob (1)
Table Support (36)
Washer (3)
19
Max. 2 mm
Sanding Disc (27)
Edge of Table
Angle Scale for
Tilting (37)
Fence (9)