Before First Use; Assembling The Handle And The Hook And Loop Disc; On/Off Switch; Speed Control - Westfalia 85 88 46 Instruction Manual

Before first Use

Remove the polisher and all accessories for the packing. Keep
packaging materials out of the reach of children. There is a risk of
suffocation!
Protect your eyes with safety goggles. Always wear
ear protection while working with the polisher.

Assembling the Handle and the Hook and Loop Disc

Disconnect the machine from power mains before commencing
any assembly work!
Mount the handgrip (1) on the polisher in order to can hold the
machine securely during work.
1. Attach the handgrip to the transmission housing and bolt the
handgrip down with the hex screws (2). Tighten the screw
with the included hex key.
2. For mounting the hook and loop disc (3) hold the spindle with
the included spanner and screw down the disk.
Please note that the treaded pin on the disk is protected with
a cover for shipping. Remove the cover before assembly.

ON/OFF Switch

The ON/OFF switch (4) is located on the top of the machine.
Push it forwards in the ON direction to turn the machine on and
push it back in the direction OFF to turn the machine off.

Speed Control

With the speed dial (5) at the back of the unit you can regulate
the speed of the machine.

Attaching the Accessories

The polisher is supplied with a lambskin buffing pad and a
terrycloth pad.
Operating
13