Before First Use; Assembling; Installing/Replacing The Sanding Belt - Westfalia 64 16 05 Original Instruction Manual

Before first Use

Remove the angle grinder and the accessories for the packaging.
Keep packaging material out of reach of children. There is risk of
suffocation!

Assembling

The power file is delivered partly assembled to
ensure transport. The power file is equipped with
2 interchangeable grinding arms of 8 and 13 mm
width.
For assembling the power file, proceed as
follows:
1. Insert the regulating turn knob (7) from the
right side into the sanding arm holder (10)
and the black spring from the left side into the
provided notch.
2. Attach the sanding arm (3) to the holder and
tighten with the regulating turn knob. In the
sanding arm you will find the suitable thread
for the turn knob.
3. Lightly press the sanding arm holder and the sanding arm
together in order to tighten the regulating turn knob.

Installing/Replacing the Sanding Belt

Disconnect the unit from power mains.
1. Slacken the sanding arm by folding the
tensioning lever (8) forward.
2. Insert the sanding belt (11) into the
housing. Guide the sanding belt behind
the cover (5). Please follow the rotating
direction arrow on the sanding belt and
the cover. The direction arrows have to
be in the same direction.
Operation
11