Hanseatic HWM714A3D User Manual page 94

Seite EN-44 Troubleshooting table
The display shows an error code
Problem
Pump
Unplug the mains
plug.
Filter
Check fi lter.
High water level
Turn off the tap.
Possible causes Solutions, tips
Pump is faulty or Cleaning the lint trap. If the problem per-
lint trap is clogged. sists, please contact our Service Centre
(see page EN-45).
Pump is faulty, Cleaning the lint trap. If the problem per-
pump filter is sists, please contact our Service Centre
clogged, or electri- (see page EN-45).
cal connection of
pump is defective.
Too much water in The machine automatically pumps out
the appliance. water. Following the pumping out process,
switch off the machine and pull out the
mains plug. Shut the tap and please con-
tact our service centre (see page EN-45).