General Information
Setting the RIDER Mode
Options
Note:
•
During setup, ABS and TTC can be
activated or de-activated in the
RIDER Mode.
•
If the RIDER Mode is currently
selected, changes to the MAP, ABS
and
TTC
systems
immediately active.
•
If the ROAD or OFF ROAD Modes are
selected the RIDER settings will not
become active until the RIDER Mode
is selected (see page 48).
To set the RIDER Mode options; with the
motorcycle stationary and in neutral,
turn the ignition to the ON position.
• Press and hold the MODE button on
the instruments until MAP is visible
in the display screen.
52
or alternatively:
will
become
• Press and release the SET button
on the left hand switch housing
until SEtUP is visible in the display
screen.
• Press and release the SCROLL
button until RidER is displayed in
the lower instrument display, then
press the SET button.
RidER Displayed