Maintenance
Rear Suspension Spring Preload
Adjustment
Street Triple R - LRH
The spring preload adjuster is located at
the top of the rear suspension unit.
2
1.
Peg
2.
Position 1 (minimum adjustment)
3.
Adjustment tool
To change the spring preload setting:
•
Insert the adjustment tool supplied
in the tool kit into the slot in the
adjuster ring.
•
Turn
the
counterclockwise to increase spring
preload, and clockwise to decrease
spring preload.
•
Adjuster settings are counted from
position one with position one being
with
the
adjuster
clockwise. Position one gives the
minimum amount of spring preload.
164
1
3
adjuster
ring
turned
fully
Rear Suspension Spring Preload
Adjustment
Street Triple S (40.2 cu in (660 cc))
The spring preload adjuster is located at
the top of the rear suspension unit.
2
cjxi
1.
Peg
2.
Position 1 (minimum adjustment)
3.
Adjustment tool
To change the spring preload setting:
•
Insert the adjustment tool supplied
in the tool kit into the slot in the
adjuster ring.
•
Turn
the
counterclockwise to increase spring
preload, and clockwise to decrease
spring preload.
•
When delivered from the factory,
the spring preload adjuster will be
set to the Solo Riding position as
shown in the suggested suspension
settings table.
•
Adjuster settings are counted from
position one with position one being
with
the
adjuster
clockwise. Position one gives the
minimum amount of spring preload.
1
3
adjuster
ring
turned
fully