D2 ™ Pilot Watch Connectivity (Optional) - Garmin GI 275 Pilot's Manual

The file containing the recorded data will appear in the format shown in the following figure.
The .csv file may be viewed with Microsoft Excel
log_190806_154521_KNPA.csv
7.5 D2 PILOT WATCH CONNECTIVITY (OPTIONAL)
™
The D2 ™ Pilot Watch can be connected to the MFI through a Bluetooth Low Energy (BLE)
network. Once connected, the following information is sent real-time to the D2
• Indicated Airspeed (IAS)
• True Airspeed (TAS)
• Vertical Speed
• Pressure Altitude
• Wind Speed
The D2 Watch must be 'paired' with the MFI in order to use the various functions.
™
Pairing is accomplished once for each device. After the initial pairing, with 'Auto-Reconnect'
enabled, your D2 ™ Watch will automatically reconnect with the MFI. The pairing operation
is completed from the D2
and one BLE device. For D2
NOTE: The aircraft must be on the ground to pair the D2
NOTE: The wireless card on the MFI may take up to two minutes after startup before
wireless functionality is available.
Pairing the D2 Watch with the MFI:
™
1) Place the D2 Watch in pairing mode. Reference the operating manual for the D2
for detailed pairing instructions.
2) On the MFI, open the menu and select System > Wireless.
3) Scroll down and select Pair a Device. On the 'Pair Device' Screen, the MFI will display
its Bluetooth name and prompt the pilot to "Please remain on this page while pairing
your Bluetooth device."
190-02246-01 Rev. A
Local Date Local 24hr Time
YYMMDD HHMMSS
Log File Format
™ Watch and the MFI. The MFI can connect three Bluetooth devices
™ Watch specific instructions, see the D2
Garmin GI 275 Pilot's Guide
Additional Features
®
or other spreadsheet applications.
Nearest Airport
(A blank space will
be inserted if no
airport is found)
• Wind Direction
• Outside Air Temperature (OAT)
– Static and Total
• Height Above Terrain (HAT)
• Density Altitude
™ Pilot Watch:
™ Pilot Owner's Manual.
Watch.
™
Watch
™
183