Garmin GI 275 Pilot's Manual page 116

Navigation
State Borders
State borders are always displayed on the 'HSI Map' Page depending on map range and detail
level. State borders may be enabled or disabled for display on the 'Map' Page, and the range
setting may be adjusted.
Enabling/disabling the display of state borders on the 'Map' Page:
1) From the 'Map' Page, open the menu and select Map Options > Land Options.
2) Select the State Borders Button to enable/disable.
3) If necessary, select the State Borders RNG Button to display a list of range display
settings. Select the desired range setting for when state borders should be displayed.
Track Vector
The 'HSI Map' Page and the 'Map' Page can display a track vector that is useful in minimizing
track angle error. The track vector is a dashed cyan line segment extended to a predicted
location. The track vector look-ahead time is selectable (30 sec, 60 sec (default), 2 min, 5 min,
10 min, 20 min) and determines the length of the track vector.
Track Vector
Changing the track vector display settings for the 'HSI Map' Page:
1) From the 'HSI Map' Page, open the menu and select HSI Map Options > Map Options
> Track Vector.
2) Select the desired look-ahead Time Button. To disable the track vector, select the Off
Button.
Changing the track vector display settings for the 'Map' Page:
1) From the 'Map' Page, open the menu and select Map Options > Map Options >
Track Vector.
2) Select the desired look-ahead Time Button. To disable the track vector, select the Off
Button.
94
'Map' Page - Track Vector displayed
Garmin GI 275 Pilot's Guide 190-02246-01 Rev. A