Table of Contents
Advertisement
LAN Network
In this section, you can view and configure information about the DHCP server, DHCP clients and Ethernet ports.
On this page, you can configure LAN settings for IPv4 and IPv6 communications.
1. In the left menu, click
2. Fill in the fields using the information in the table below.
3. To create a default route for this WAN, click the
4. Click
APPLY
to save your changes.
Field
Description
IPv4 Settings
section
Configuration
Select the appropriate method for your WAN. The page refreshes to show the fields that apply for the selected
Method
method. Options are Static and DHCP. The default is Static.
Address
(Available when Static is selected in the
(such as 192.168.1.44). The default is the address assigned to the gateway.
Subnet Mask
(Available when Static is selected in the
default is 255.255.255.0.
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019
Network
>
LAN
Network. The following page appears.
white circle
Configuration Method
Configuration Method
to the right of
Create Default
field) Enter the IP address for IPv4 communications
field) Enter the IP subnet mask for this gateway. The
Route.
22
Hide quick links:
Advertisement
Table of Contents
