Table of Contents
Advertisement
SNMP
On this page, you can configure a SNMPD service for your gateway.
1. In the left menu, click
2. To enable the SNMPD service, click the
3. Fill in the fields, using the information in the following table. All fields are optional.
4. Click
APPLY
to save your settings.
Field Name
Description
Read Community Enter the SNMP community string for your network which allows read-only access.
Set Community
Enter the SNMP community string for your network which allows read-write access.
System Name
Modify the name of the gateway.
System Location
Modify the default location of this service.
System Contact
Enter the email address for the contact person.
Trap Manager IP
Enter the IP address of the server where the SNMP trap manager is located.
Allow SNMP to
This option is disabled by default. To enable this option, click the
Contact Device
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019
Services
> SNMP. The following page appears.
white circle
to the right of Enabled.
white
circle.
70
Hide quick links:
Advertisement
Table of Contents
