Installing Your Sr400Ac Gateway - ADTRAN SmartRG SR400ac User Manual

Installing your SR400ac Gateway

1. Connect a LAN port on the SmartRG gateway to your PC using an Ethernet cable.
2. To connect a broadband device (such as a cable modem):
a. Connect one end of an Ethernet cable to the WAN port on the SmartRG gateway and connect the other end of the
cable to the broadband modem.
b. Connect one end of the cable supplied by your provider to the broadband modem and connect the other end of the
cable to the wall jack installed by your provider.
3. Plug the power adapter to the wall outlet and then connect the other end of it to the Power port of the gateway.
4. Turn on the unit by pressing the Power button on the side of the gateway.
Your gateway is now automatically being set up to connect to the Internet. This process may take a few minutes to complete before
you can begin using your Internet applications (browser, email, etc.).
If you are unable to connect to the Internet, verify that all cable connections are in place and the gateway's power is turned on.
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019 7