Brother DCP-T520W Online User's Manual page 472

Settings > [Network]
Level 1 Level 2
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
WLAN(Wi-Fi) Find Wi-Fi
Network
TCP/IP
WPS/Push Button
WPS/PIN Code
WLAN Status
Level 3
BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS
Configuration
WINS Server
DNS Server
APIPA
IPv6
-
-
-
-
BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS
Configuration
WINS Server
DNS Server
APIPA
IPv6
-
-
Status
Signal
SSID
Comm. Mode
Descriptions
Select the Boot method that best suits your
needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary or
secondary WINS server.
Specify the IP address of the primary or
secondary DNS server.
Set the machine to allocate the IP address
from the link-local address range
automatically.
Turn the IPv6 protocol on or off.
Select the Ethernet link mode.
View the current wired status.
View the machine's MAC address.
Configure your wireless network settings
manually.
Select the Boot method that best suits your
needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary or
secondary WINS server.
Specify the IP address of the primary or
secondary DNS server.
Set the machine to allocate the IP address
from the link-local address range
automatically.
Turn the IPv6 protocol on or off.
Configure your wireless network settings
using the one-button push method.
Configure your wireless network settings
using WPS with a PIN.
View the current wireless network status.
View the current wireless network signal
strength.
View the current SSID.
View the current Communication mode.
466