Brother DCP-T520W Online User's Manual page 451

Home > Machine Settings
Date and Time
Set the Date and Time
(MFC models)
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to
each fax you send by setting your Station ID.
(DCP models)
If the machine's power has been off, the machine's date and time may not be current. Re-enter them.
>> DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW
>> MFC-T920DW/MFC-T925DW
DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW
1. Press Menu.
2. Press a or b to make your selections:
a. Select [Initial Setup]. Press OK.
b. Select [Date & Time]. Press OK.
c. Select [Date & Time]. Press OK.
3. Press a or b on the control panel to set the last two digits of the year. Press OK. Repeat these steps for
setting the month and day.
4. Press a or b to select [12h Clock] or [24h Clock], and then press OK.
5. Enter the digits for the time in one of the following ways:
• If you selected [12h Clock]:
- Press a or b on the control panel to set the hour. Press OK. Repeat these steps for setting the minute.
- Press a or b to select [AM] or [PM], and then press OK.
• If you selected [24h Clock]:
- Press a or b on the control panel to set the hour. Press OK. Repeat these steps for setting the minute.
6. Press Stop/Exit.
MFC-T920DW/MFC-T925DW
1. Press Settings.
2. Press a or b to make your selections:
a. Select [Initial Setup]. Press OK.
b. Select [Date & Time]. Press OK.
c. Select [Date]. Press OK.
3. Enter the last two digits of the year using the dial pad, and then press OK.
4. Enter the two digits for the month using the dial pad, and then press OK.
5. Enter the two digits for the day using the dial pad, and then press OK.
6. Press a or b to select [Clock Type], and then press OK.
7. Press a or b to select [12h Clock] or [24h Clock], and then press OK.
8. Press a or b to select [Time], and then press OK.
9. To enter the time, do one of the following:
• If you selected [12h Clock]:
a. Press a or b to select [AM] or [PM], and then press OK.
b. Enter the four digits of the time (in 12-hour format) using the dial pad, and then press OK.
• If you selected [24h Clock]:
Enter the four digits of the time (in 24-hour format) using the dial pad, and then press OK.
> Change Machine Settings from the Control Panel > General Settings > Set the
445