Brother DCP-T520W Online User's Manual page 106

[Colour Setting] depends on the settings you have selected. Pressing Mono Start or Colour Start
does not allow you to change the settings.
MFC-T920DW/MFC-T925DW
1. Load your document.
2. Press (SCAN).
3. Press a or b to select the [to PC] option, and then press OK.
4. Press a or b to select the [to File] option, and then press OK.
5. If the machine is connected over the network, press a or b to select the computer where you want to send
data, and then press OK.
If the LCD message prompts you to enter a PIN, use the control panel to enter the four-digit PIN for the
computer, and then press OK.
6. Do one of the following:
• To change the settings, go to the next step.
• To use the default settings, press Mono Start or Colour Start.
[Colour Setting] depends on the default settings. Pressing Mono Start or Colour Start does not allow
you to change the settings.
7. Press a or b to select the [Scan Settings] option, and then press OK.
To use the [Scan Settings] option, you must connect a computer with Brother iPrint&Scan installed to
the machine.
8. Press a or b to select the [Set at Device] option, and then press OK.
9. Select the scan settings you want to change, and then press OK.
Option
Colour Setting
Resolution
File Type
Document Size
Brightness
Contrast
Remove Background Change the amount of background colour that is removed.
10. Press Mono Start or Colour Start.
[Colour Setting] depends on the settings you have selected. Pressing Mono Start or Colour Start
does not allow you to change the settings.
Related Information
• Scan Using the Scan Button on Your Machine
Description
Select the scan colour format of your document.
Select the scan resolution for your document.
Select the file format for your document.
Select your document size.
Select the brightness level.
Select the contrast level.
100