Brother DCP-T520W Online User's Manual page 30

Home > Paper Handling
Paper Tray
Load Legal Size Paper in the Paper Tray
• If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message
appears on the LCD, allowing you to change the paper size and paper type.
• Load only one size and type of paper in the paper tray at a time.
• When you load a different paper size in the tray, you must change the Paper Size setting in the machine or
the paper size setting on your computer.
Doing this enables the machine to automatically feed paper from the appropriate tray if Auto Tray Select
has been set in the printer driver (Windows) or on the machine. (DCP-T820DW/DCP-T825DW/
MFC-T920DW/MFC-T925DW)
This operation is available only for some countries.
1. If the paper support flap (1) is open, close it, and then close the paper support (2).
2. Pull the paper tray completely out of the machine.
3. Lift the output paper tray cover (1).
1
4. Press the square paper tray expansion button (1) and slide out the paper tray until the square paper tray
expansion button locks into the square LGL hole.
> Load Paper > Load Paper in the Paper Tray
1
2
> Load Legal Size Paper in the
24