Brother DCP-T520W Online User's Manual page 428

3. Press c.
The machine prints the Print Quality Check Sheet.
4. Check the quality of the four colour blocks on the sheet.
5. When an LCD message prompts you to check the print quality, do one of the following:
• If all lines are clear and visible, press d to select [No].
The Print Quality check finishes.
• If lines are missing (see Poor, below), press c to select [Yes].
OK
Poor
6. When the LCD message prompts you to check the print quality of each colour, press d or c to select the
pattern (1–4) that most closely matches the printing result. Press OK.
7. Do one of the following:
• If print head cleaning is needed, press c to start the cleaning procedure.
• If print head cleaning is not needed, the menu screen reappears on the LCD.
8. After the cleaning procedure is finished, the LCD message prompts you to check the print quality again.
Press c [Yes] to start the print quality check.
9. Press c again.
The machine prints the Print Quality Check Sheet again. Check the quality of the four colour blocks on the
sheet again.
If you clean the print head several times and the print has not improved, try the Special cleaning method. See
Related Information.
IMPORTANT
DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print
head's warranty.
422