Set The Transmission Verification Report's Style - Brother DCP-T520W Online User's Manual

Home > Fax > Fax Reports

Set the Transmission Verification Report's Style

Related Models: MFC-T920DW/MFC-T925DW
You can use the Transmission Verification Report as proof that you sent a fax. This report lists the receiving
party's name or fax number, the time and date of transmission, duration of transmission, number of pages sent,
and whether or not the transmission was successful.
There are several settings available for the Transmission Verification Report:
Option
On
On(+Image)
Error only
Error only(+Image)
Off
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Report Setting]. Press OK.
c. Select [XMIT Report]. Press OK.
d. Select the option you want. Press OK.
If you select [On(+Image)] or [Error only(+Image)], the image will not appear on the
Transmission Verification Report if Real Time Transmission is set to [On].
3. Press Stop/Exit.
If the transmission is successful, [OK] appears next to [RESULT] on the Transmission Verification Report. If
the transmission is not successful, [ERROR] appears next to [RESULT].
Related Information
• Fax Reports
> Set the Transmission Verification Report's Style
Description
Prints a report after every fax you send.
Prints a report after every fax you send.
A portion of the fax's first page appears on the report.
Prints a report if your fax is unsuccessful due to a transmission error.
Prints a report if your fax is unsuccessful due to a transmission error.
A portion of the fax's first page appears on the report.
The report will not be printed.
201