Brother DCP-T520W Online User's Manual page 465

Level 1
Wired LAN
(DCP-T820DW/
DCP-T825DW)
WLAN(Wi-Fi)
Level 2
TCP/IP
Ethernet
(DCP-T820DW/
DCP-T825DW)
Wired Status
(DCP-T820DW/
DCP-T825DW)
MAC Address
(DCP-T820DW/
DCP-T825DW)
Find Network
TCP/IP
WPS/PushButton
WPS/PIN Code
WLAN Status
MAC Address
WLAN Enable
(DCP-T520W/
DCP-T525W/
Level 3 Descriptions
DNS Server Specify the IP address of the primary or
secondary DNS server.
(DCP-T820DW/
DCP-T825DW)
APIPA Set the machine to allocate the IP
address from the link-local address range
(DCP-T820DW/
automatically.
DCP-T825DW)
IPv6 Turn the IPv6 protocol on or off.
(DCP-T820DW/
DCP-T825DW)
- Select the Ethernet link mode.
- View the current wired status.
- View the machine's MAC address.
- Configure your wireless network settings
manually.
BOOT Method Select the Boot method that best suits
your needs.
IP Address Enter the IP address.
Subnet Mask Enter the Subnet mask.
Gateway Enter the Gateway address.
Node Name Enter the Node name.
WINS Config Select the WINS configuration mode.
WINS Server Specify the IP address of the primary or
secondary WINS server.
DNS Server Specify the IP address of the primary or
secondary DNS server.
APIPA Set the machine to allocate the IP
address from the link-local address range
automatically.
IPv6 Turn the IPv6 protocol on or off.
- Configure your wireless network settings
using the one-button push method.
- Configure your wireless network settings
using WPS with a PIN.
Status View the current wireless network status.
Signal View the current wireless network signal
strength.
SSID View the current SSID.
Comm. Mode View the current Communication mode.
- View the machine's MAC address.
- Turn the wireless network connection On
or Off.
459