Set Or Change A Login Password For Web Based Management - Brother DCP-T520W Online User's Manual

Home > Machine Settings
Login Password for Web Based Management

Set or Change a Login Password for Web Based Management

The default password to manage this machine's settings is located on the back of the machine and marked
"Pwd". We recommend immediately changing the default password to protect your machine from unauthorised
access.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
https://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
https://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
3. Do one of the following:
• If you have previously set your own password, type it, and then click Login.
• If you have not previously set your own password, type the default login password, and then click Login.
4. Go to the navigation menu, and then click Administrator > Login Password.
Start from , if the navigation menu is not shown on the left side of the screen.
5. Following the on-screen Login Password guidelines, type your password in the Enter New Password field.
6. Retype the password in the Confirm New Password field.
7. Click Submit.
Related Information
• Change Machine Settings Using Web Based Management
Related Topics:
• Access Web Based Management
> Change Machine Settings Using Web Based Management > Set or Change a
476