GEM R563 Operating Instructions Manual page 42

12 Specific data IO-Link (pin 6)
12.4.33 Split range
The start and end of the set value range can be set for Split range parameter.
In- Sub Off- Access
dex - set Rights
In-
dex
0xB4 1 0 R/W
2 16 R/W
Description of parameter values
Index name
Split range
12.4.34 Stroke limiter
The upper and lower valve position of the control range can be set as stroke limiter with the Stroke limiter parameter.
In- Sub Off- Access
dex - set Rights
In-
dex
0xB6 1 0 R/W
2 16 R/W
Description of parameter values
Index name
Stroke limiter
GEMÜ R563
Lengt Index name
h
Split range
16
bits
16
bits
Parameter Values
Split start 0 to Split End –
100
(0.0 to Split
End – 10.0%)
Split end Split Start +
100 to 1000
(Split Start +
10.0% to
100.0%)
Lengt Index name
h
Stroke limiter
16
bits
16
bits
Parameter Values
Max pos Min Pos to
1000
(Min Pos to
100.0%)
Min pos 0 to Max Pos
(0.0% to Max
Pos)
Parameter Type
Split start uint: 16
Split end uint: 16
Set the start of the set value range.
Set the end of the set value range.
Parameter Type
Max pos uint:16
Min pos uint:16
Set the stroke limiter of the control range in valve position
OPEN.
Set the stroke limiter of the control range in valve position
CLOSED.
42 / 53
Default Values
0 0 to Split End – 100
(0.0 to Split End –
10.0%)
1000 Split Start + 100 to 1000
(Split Start + 10.0% to
100.0%)
Description
Default Values
1000 Min Pos to 1000
(Min Pos to 100.0%)
0 0 to Max Pos
(0.0% to Max Pos)
Description
www.gemu-group.com