Safety Procedures; Hints To The Type Plate; Hints To The Renting/Leasing Of Probst Devices - probst SVZ-UNI Series Operating Instructions Manual

Maintenance and care
7.4

Safety procedures

•
It is the contractors responsibility to ensure that the device is checked by an expert in periods of max. 1
year and all recognized errors are removed (→ see BGR 500).
•
The corresponding legal regulations and the regulations of the declaration of conformity have to be
observed!
•
We recommend, that after checking the device the badge „Safety checked" is put on the device.
(Order-No.: 2904.0056+inspection sticker with date).
●
You can receive these badges from us.
The check by an expert must be proved!
Device Year
7.5

Hints to the type plate

Type, serial-number and production year are very important for the identification of your device. If you need
information to spare-parts, warranty or other specific details please refer to this information.
The maximum carrying capacity/working load limit (WLL) is the maximum load which can be handled with the
device. Do not exceed this carrying capacity/working load limit (WLL).
If you use the device in combination with other lifting equipment (Crane, chain hoist, forklift truck, excavator)
consider the deadweight of the device.
Example:
7.6

Hints to the renting/leasing of PROBST devices

With every renting/leasing of PROBST devices the original operating instructions must be included
unconditionally (in deviation of the users country's language, the respective translations of the original operating
instructions must be delivered additionally)!
Date Expert
25 / 25
Company