Operation; Device Operation With Automatic Release - probst SVZ-UNI Series Operating Instructions Manual

Operation

6 Operation
6.1

Device operation with automatic release

●
The device is connected to the lifting equipment/carrier (e.g. excavator).
●
Before lifting the device, the gripping range has to be adjusted.
●
The device is placed over the product, set down, the device closes round the product and it can be lifted.
●
Set down on the ground again, the device opens automatically, the automatic release locks it into position so that the
device can be lifted without closing up.
●
Placed over the next product, the automatic release disengages itself and the product can be lifted.
●
The device therefore is a ONE-MAN-MACHINE.
Shut-down the device without lifting equipment/carrier only on even ground. The gripping arms must be
opened enough, to ensure a secure standing of the device. Otherwise exists danger of overturning!
14 / 25