Quick BTQ1403012 User Manual page 25

WARNING
WARNING: make sure no swimmers or fl oating objects are in the vicinity before switching on the thruster.
NOTE: the motor-reversing solenoid unit group is pre-assembled and wired in such a way that the directions of
the propeller thrust correspond to the command indication stamped on the control panel TCD10xx only if the
propeller is fi tted with the text pointing towards the right side of the boat, i.e. with the propeller to the right of
F
the gearleg.
If the propeller is fi tted differently for installation/internal space requirements, it is suffi cient to invert the
connection of the wires (blue and grey) of the command wire (n° 26 in the exploded drawing BTQ14 page 26/27;
n° 25 in the exploded drawing BTQ18 page. 28/29 o n°23 in the exploded drawing BTQ18/95 page 30/31).
USE OF THE BOW THRUSTER
Information from the "TCD1022 and TCD1042" manual.
QUICK ® RESERVES THE RIGHT TO INTRODUCE CHANGES TO THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE.
BOW THRUSTER BTQ140 - BTQ185 IT GB - REV002C
USAGE
GB
25