Table of Contents
Advertisement
4.2 INSTRUMENT MODE
COVER . . . . . . . . . . . . . . . . . Sets the instrument to measure depth of cover
HALFCELL . . . . . . . . . . . . . . Sets the instrument to measure half-cell potential
4.3 SETUP
UNITS . . . . . . . . . . . . . . . . . . Opens Units menu . . . . . . . . . . . . . See 4.6 UNITS
BEEP VOLUME. . . . . . . . . . . Use Scroll keys to select beep volume 0 (off) to 5 (maximum)
LANGUAGE. . . . . . . . . . . . . . Use Scroll keys to select menu language and then press enter
AUTO SWITCH OFF . . . . . . . Use Scroll keys to select auto switch off time, 5 to 10 minutes
OPENING SCREEN . . . . . . . Press Enter to toggle the opening screen on or off
LCD CONTRAST. . . . . . . . . . Use Scroll keys to select LCD contrast, 0 to 8 and then press Enter
4.4 ABOUT
GAUGE INFORMATION . . . . Press Enter to display technical information about the
PROBE INFORMATION . . . . Press Enter to display technical information about the search
CONTACT . . . . . . . . . . . . . . . Press Enter to display Elcometer offices worldwide and
HELP . . . . . . . . . . . . . . . . . . . Press Enter to display an explanation of all the symbols
4.5 RESET
INTL GAUGE. . . . . . . . . . . . . Press Enter to Reset Covermeter to International settings
USA GAUGE . . . . . . . . . . . . . Press Enter to Reset Covermeter to USA settings
Note: The Covermeter will display a Yes/No confirmation screen before reset is activated.
4.6 UNITS
MM. . . . . . . . . . . . . . . . . . . . . (Millimetres) Use Scroll keys to select units, then press Enter
INCH . . . . . . . . . . . . . . . . . . . (Inches) Use Scroll keys to select units, then press Enter
j.
'Instrument mode' is not included on Elcometer Model B.
k.
International settings can also be activated at switch on:
Press and hold third softkey
l.
USA settings can also be activated at switch on:
Press and hold fourth softkey
j
and then press Enter
or off and then press Enter
Covermeter
head
(if programmed) Supplier contact details
used on the display
(DD/MM/YYYY date format, metric units, etc.)
(MM/DD/YYYY date format, imperial units, etc.)
and switch on gauge.
and switch on gauge.
R
T
HE MENUS
k
l
13
Advertisement
Table of Contents
