Table of Contents
Advertisement
G
ETTING STARTED
Borehole probe - set to forward-looking operation
Borehole probe - set to sideways-looking operation
The Covermeter must be zeroed after a search head has been fitted and after changing between
high-tensile and stainless modes - the display will show PLEASE ZERO and the ZERO softkey will
flash to remind you.
The metal and plastic bracket on the outside of the main unit is a storage clip for standard and
narrow pitch search heads. The bracket provides a convenient place to store the search head while
the Covermeter is not in use.
3.3 Identifying search heads
The four search head types are one of two physical sizes. The Narrow Pitch and Standard heads
are in a small package which fits in the rails on the top of the instrument. The Deep Cover and THD
search heads are larger and do not fit in the rails. Each head is fitted with a label which identifies
its type for ease of recognition. The software also shows an indication of the search head type as
indicated in section 3.2.
6
R
Figure 4. Search head storage clip
Advertisement
Table of Contents
