Level Sensor Assembly
1
Check all parts are present.
4
Exchange the drip tray.
NOTE: A WARNING TONE WILL SOUND WHEN THE WATER RISES (3 BEEPS EVERY
15 SECONDS REPEATED). UPON EMPTYING THE CONTAINER THE WARNING TONE
WILL STOP. CONTINUAL BEEP INDICATES LOW BATTERY POWER.
Borg & Overström
B4.2 Install & Operation Manual
2
Unscrew lid.
5
Connect the drainage tubing that is
pre-fitted down the front left hand side of
the cabinet.
6
3
PANASONIC
CR 2032
PANASONIC
3V
CR 2032
Fit both batteries and refit lid.
6
Level sensor positioned in container.
3V
AU