Borg & Overstrom B4 Install & Operation Manual page 13

Sanitisation Guide (Continued)
9
When the external cleaning
(after a minimum of 5 minutes)
is completed, flush the machine
using the cold, sparkling and
ambient button with clean
water until the dispense water
runs clear.
Borg & Overström
10
Turn off water and remove the
service filter. Retain service
filter for reuse.
Please note that this sanitisation fluid contains an
active caustic/alkaline agent.
Always use responsibly and with care remembering
that due to its alkaline nature unnecessary
concentrated/prolonged contact with any materials,
including metals, can cause damage. Always rinse
all contact surfaces after use with clean water.
B4.2 Install & Operation Manual
11
Fit new filter. Turn on incoming
water supply.
Avoid skin contact and wear
protective gloves when han-
dling sanitisation fluids
In the event of any skin
contact, flush immediately
with clean, cold water
13
12
Pre-flush the new filter to waste
using the ambient button (and
sparkling button if present)
until the water appears
clear and is free of air. Flush
through a small amount of
water to check all functions.
AU