Advertisement
22
Operation and
6
maintenance
Drive-activity
light
TapeStor 8GB Installation Manual
Loading and unloading
cartridges
On the front of your drive is an opening for inserting
Travan cartridges. A protective door covers the
opening. Above and to the left of the door is the
drive-activity light.
T T T T T o load a car
o load a car
o load a car
o load a cartridg
o load a car
tridg
tridg
tridg
tridge e e e e , insert it in the drive with the
metal baseplate down and the tape-access door
facing into the drive, as shown at left. The cartridge
only fits in one orientation. Push the cartridge into
the drive until it stops (about 1/3 of the cartridge
remains visible outside the drive).
T T T T T o unload a car
o unload a car
o unload a car
tridg
tridge e e e e , wait until the drive-activity
tridg
o unload a car
o unload a cartridg
tridg
light is OFF. Then grasp the exposed sides of the
cartridge and pull the cartridge straight out. If the
drive-activity light has gone out, but you believe your
backup or restore operation did not complete, repeat
the data transfer.
C C C C C aution.
aution.
aution.
aution. Do not remove a tape cartridge while the
aution.
drive-activity light is on.
Advertisement
