Quick Search; Repeat Function; Random Playback; Programming Function - TechniSat DIGITRADIO 370 CD IR Manual

12.5 Quick search

While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
> Hold down the Previous Track
forwards or backwards within a track for as long as the button is held down.

12.6 Repeat function

You can select whether a track, the entire folder/album (only for MP3 CDs) or all of
the tracks on the CD are to be repeated.
> Press the Repeat
The selected mode appears on the display (Repeat Track, Repeat Album,
Repeat All).
> To switch the function off again, press the Repeat button again until the
repeat icon on the display disappears.

12.7 Random playback

With the random generator, the CD tracks can be played back in random order.
> If you press the SHUFFLE
on the display
> To switch the function off again, press the SHUFFLE button again.

12.8 Programming function

With the programming function, you can play up to 20 tracks on a music CD or an
MP3 CD in an order determined by you.
You can only undertake the programming if there is a disc inserted and the
device is in stop mode.
> Press the PRESET button on your remote control.
> The track number (T) now flashes in the display. [P01] appears to the left of
this. P01 is the first programming slot. Any tracks you want can then be set up
in sequence in the programming slots. With MP3 CDs you can select the folder
using F+ and F-.
> Use the Previous track
programmed.
> Press the ENTER button to accept the track.
> The second programming slot (P02) is then active. Proceed as described
above to save a track to programming slot 2. Do this to save the tracks you
want to all the programming slots.
> Press the Play/Pause
or Next Track
button multiple times.
button while playing, the shuffle icon appears
or Next track
button to play the programmed tracks.
buttons to quickly skip
to select the first track to be
DE
EN
FR
NL
73