TechniSat DIGITRADIO 370 CD IR Manual page 79

> Then select your WLAN network.
You can now choose whether to use the WPS function or whether you prefer
to enter your WLAN password manually.
> If you would like to use the WPS function, launch it on your router first as per
its instruction manual and then select [Press WPS Button] in the network
wizard.
Please observe the display overlays. The connection process is generally
completed in a few seconds and the WLAN connection can be used.
> If you wish to enter your WiFi password manually, or if your router does not
support the WPS function, select [Skip WPS].
> Then enter the password using the displayed virtual keyboard. Then select
and press the ENTER button. If the password entered is correct a
connection to the network is now established. To cancel the entry, select
and press the ENTER button. If you make a typing error you can
delete the last letter entered using
When the virtual keyboard is displayed, you can use / on the remote
control for navigation. The / buttons move the highlight upwards and
downwards, the / buttons move the highlight to the right and left.
The entered password will then be verified. This process is generally
completed in a few seconds and the WLAN connection can then be used.
The signal bar
connection has been established.
16.3.1.2 Configuration via the WPS function
This establishes a direct connection to the router. Selecting and/or entering a WLAN
network (SSID) and password is not required.
> Start the WPS function on your router as per the instruction manual.
> Then select [PBC WLAN Set-up] to launch the connection process.
Please observe the display overlays. The connection process is generally
completed in a few seconds and the WLAN connection can be used.
Alternatively the [PIN] function can be used if this function is supported by
the router.
16.3.1.3 Manual configuration
> Select [Manual settings] then [Wireless] to launch manual configuration.
in the status bar of the display indicates whether the
.
DE
EN
FR
NL
79