Menu Operation - TechniSat DIGITRADIO 370 CD IR Manual

In FM mode:
[Radio text] (where broadcast), [Frequency], [Channel type] (PTY), [Audio
information] and [Date].
In Bluetooth mode:
[Pairing Status] and [Date].
In CD/USB mode (only where the relevant data is available):
[Date], [Track], [Album], [Artist], [Weekday].
4.4.5.2 Slideshow
Some DAB+ broadcasters broadcast additional information such as the album cover
of the current track, adverts or weather information. The size of the window can be
set using the ENTER or TUNING/ENTER button.

5 Menu operation

All the DIGITRADIO 370/371 CD IR functions and settings are accessed via the menu.
Menu navigation takes place using the MENU, BACK, / and ENTER buttons on the
remote control. The menu is divided into submenus and, depending on the selected
source, contains different menu items or functions that can be enabled. To open the
menu, simply press the MENU button briefly. To change to submenus, first of all press
the / buttons to display a submenu, then press the ENTER button to retrieve the
submenu. An asterisk (*) highlights the current selection.
To close the menu: Press the MENU button several times (depending on which
submenu you are in) until the current radio channel is displayed again.
Settings are not saved until the ENTER button is pressed. If the MENU or BACK
button is pressed instead, the settings will not be accepted and saved. Use the
BACK button to go back one step.
The functions and buttons to be pressed are shown in bold in this instruction
manual. Displays in [square brackets].
Some text (e.g. menu items, station information) may be too long to show on
the display. These will be then shown as running text shortly thereafter.
Advice on using the device: The TUNING/ENTER knob can be either turned or
pressed.
Press the TUNING/ENTER knob to Confirm/ENTER/Snooze.
Turn the TUNING/ENTER knob for P+/- or  / / track search.
The following operations are all explained using the buttons on the remote
control. Press the relevant buttons on the device if you want to carry out the
function on the device.
DE
EN
FR
NL
61