1
Outline
The troubleshooter function displays on the NA unit the controller errors of the CPU or other
units, with the use of the NJ/NX-series CPU unit's function to monitor errors.
The troubleshooter screens are installed in the NA unit system. Thus, there is no need at all
for the users to create the conventional alarm screens using the graphic tool (i.e. to perform
the settings on Sysmac Studio) for NA. Moreover, the contents that are to be displayed as
"User Events" are to be registered in advance in "Event Settings" in Sysmac Studio, which
eliminates the need for setting alarms in the NA tool.
<NJ/NX Troubleshooter for NA>
Sysmac Studio also has the same troubleshoot function as that of the NA unit.
Selecting [Tools]-[Troubleshooting...]-[Controller Event Log] displays the screen
shown below.
<Sysmac Studio Troubleshooter>
7