Omron NA Series Practices Manual page 16

Event Logs – Controller Events
When "Yes" appears in the Controller Event Status column on the "Event Logs" tab, it
means that there is a log of the errors that have occurred so far in the controller. Check for
the log following the procedure below.
1.
When "Yes" is displayed in the
Controller Event Status column on
the "Event Logs" tab, press the
"Show Controller Events" button at
the bottom of the screen.
2.
The screen is switched to
"Controller Events". A list of the
controller events that have
occurred so far is displayed. Select
an event from the list and press
"Show Detail" at the right bottom of
the screen.
3.
The details of the event that is
selected in Step 2 appear.
You can recover from the problem
by referring to what is displayed in
"Detailed Information".
16
常画