Omron NA Series Practices Manual page 12

Active Events – Controller Events
When "Error" appears in the Controller Event Status column on the "Active Events" tab, it
means that an error has occurred in the controller. Check for the currently occurring errors
following the procedure below.
1.
When "Error" is displayed in the
Controller Event Status column on
the "Active Events" tab, press the
"Show Controller Events" button at
the bottom of the screen.
2.
The screen is switched to
"Controller Events". A list of the
currently occurring controller
events is displayed. Select an
event from the list and press
"Show Detail" at the right bottom of
the screen.
3.
The details of the event that is
selected in Step 2 appear.
You can recover from the problem
by referring to what is displayed in
"Detailed Information".
4.
In Steps 2 and 3, if you press the
"Screen Shot" button, the currently
displayed screen can be captured
and saved in an SD Memory Card.
You can attach the saved image to
defect reports.
When no SD Memory Card is
inserted in NA, if you press "Yes"
in the dialog box shown on the
right, the following message
appears.
"Failed to capture screenshot –
Could not find the storage media
'SDCard'."
12