Active Events – User Events
When "Error" appears in the User Event Status column on the "Active Events" tab, it means
that at least one of the errors created in Step 5 in Section 2-3 has occurred. Check for the
currently occurring errors following the procedure below.
1.
When "Error" is displayed in the
User Event Status column on the
"Active Events" tab, press the
"Show User Events" button at the
bottom of the screen.
2.
The screen is switched to "User
Events". A list of the currently
occurring user events is displayed.
Select an event from the list and
press "Show Detail" at the right
bottom of the screen.
3.
The details of the event that is
selected in Step 2 appear.
You can recover from the problem
by referring to what is displayed in
"Detailed Information".
Pressing the "Show Specified
Page" button allows you to jump to
the page that is created with
Sysmac Studio and related to the
trouble. For more details, refer to
Steps 7 to 9 on Page 14.
4.
In cases of User Events, you can
clear the currently occurring event
by pressing the "Error Reset"
button on the Troubleshooter
screen.
When you press the "Error Reset"
button, the "Do you want to really
reset the error?" message
appears. Press "Yes".
M 各異
13