Omron NA Series Practices Manual page 14

5.
The "The error was reset
successfully." Message appears.
Press "OK" and then "Back" at the
top right of the screen.
6.
On the "Active Events" screen, you
will find that the event you just
cleared has been deleted.
7.
As described in Step 3, if you
press the " Show Specified Page "
button in the Details screen of the
user event, the page created with
Sysmac Studio can be displayed.
You can specify the page from
[HMI]-[Controller Events]-[User
Events] on Sysmac Studio, as
described in Step 8 below.
8.
Specify the page related to the
Troubleshooter as below.
Select [HMI]-[Controller
Events]-[User Events], and
right-click on the edit pane of "User
Events" and select [Add].
9.
Add in [Event Code] the code of
the event for which to display the
related page, and enter in
[Troubleshooter Associated Page]
the name of the page to display.
The [Event Code] represents the
code that is assigned in [Event
Settings] in Step 5 on Page 10.
With the settings shown on the
right, when you press [ Show
Specified Page ] on the User
Events Details screen of
Troubleshooter, the [Emerstop]
page appears.
14
In [Event Name/Comment], the ones set in [Event Name]
in Step 5 on Page 10 are automatically displayed.