Omron NA Series Practices Manual page 17

Event Logs – User Events
When "Yes" appears in the User Event Status column on the "Event Logs" tab, it means that
there is a log of the errors created in Step 5 in Section 2-3 (on Page 10). Check for the log
following the procedure below.
1.
When "Yes" is displayed in the
User Event Status column on the
"Event Logs" tab, press the
"Show User Events" button at
the bottom of the screen.
2.
The screen is switched to "User
Events". A list of the user events
that have occurred so far is
displayed. Select an event from
the list and press "Show Detail"
at the right bottom of the screen.
3.
The details of the event that is
selected in Step 2 appear.
You can recover from the
problem by referring to what is
displayed in "Detailed
Information".
4.
You can clear the event log by
pressing the "Log Clear" button
in the screen that shows the list
of the user events described in
Step 2.
Pressing the button displays the
"Do you really want to clear the
event log?" message. Press
"Yes".
17