Weinmann MEDUMAT Easy CPR Instructions For Use Manual page 65

If the button on MEDUtrigger is pressed and the manual mode is
not activated, an information tone sounds. This occurs, for
example, if the Man. button or the button on MEDUtrigger is
pressed in demand flow mode.
2. If necessary: Place the ventilation mask on the mouth and nose.
Hold the ventilation mask firmly in place.
3. Press the button on MEDUtrigger to ventilate the patient:
• To trigger a single mechanical breath, press the button on
MEDUtrigger once
or
• To trigger two mechanical breaths one after the other,
press and hold the button on MEDUtrigger.
A new mechanical breath can only be triggered if the inspiration
and expiration phase of the previous mechanical breath has
already ended.
An information tone sounds if the inspiration and expiration
phase has not yet ended.
Result The device is operated in manual mode.
Switching off manual mode
1. Press the Man. button.
The device continues to ventilate in continuous mode.
or
O )
m H
p M ax (c
2
4 5
2 0
MEDUMAT Easy
6 Operation
CPR
EN 65