E-Mon® Series Global User Manual
3.4. Meter Connections
The E-Mon Energy meters have connection terminals for current sensing using external
current sensor. It requires integration of CS of relevant rating to be installed as per
specifications. The CS configuration is done using the front panel display by entering primary
and secondary values through the Setup menu.
The meters are designed for implementation in 3-phase networks with various connection
topologies. The meter is ideal for use in 3 wire, 3-phase, Delta and Wye connections.
Description
1. Terminal Sealing Slider
2. Current sensor terminal
3. Status LED
4. Side Label
5. UP/Down button
6. Set/Back Button
7. Sealable set-up slider
Page | 24
Figure 8. E-Mon meter overview
Table 4. Meter Connections
Used to seal the terminals
Terminal for CS/ inputs for current measurement
Display Meter Status
Meter Information
Navigation (Up/Down or Right/Left)
Short Press – Confirm
Long Press – Back
Lock setup with Sealable slider
Function
54-000-01-ENG01-0121
Overview