Report Push - Vivotek SC8131 User Manual

3-6. Report Push

Configure the report push protocols so that you can receive periodic counting reports. The
reports include camera information and aggregated counts by the configured intervals for
each counting rule. Click the Add button to begin.
Status
: success
Name User defined name.
Address HTTP: http://IPaddress:portURI
FTP: ftp://APaddress:port -> destination
Email: ServerIPaddress:port
Delivery The duration between next pushed aggregated report. At the same time, it
Schedule is also the total duration of one report. This camera supports the delivery
schedule ranging from 1 min, 5 mins, 15 mins, 30 mins, 1 hr, 12 hrs, to 1
day. All schedule starts from 00:00.
Aggregation This indicates the aggregation period for each data set in the reports.
level Events in the same aggregation level will be accummulated as one data
set. This camera supports the same options as the Delivery schedule.
Note that the aggregation level must be shorter than the Delivery
schedule.
Report Type Log, Queue raw data, Queue aggregate data, Counting/Zone
Lite In the Lite mode, the period of time in which no data has been collected
will be ignored. This can reduce the size of each report.
Format XML, CSV, and JSON. The detailed contents will be introduced later.
: failed [empty]: not yet executed
VIVOTEK
User's Manual - 85