Queue Analysis (5Th Type); To Configure The Queue Analysis - Vivotek SC8131 User Manual

3-3-4. Queue Analysis (5th type)

Queue Analysis rovides a count of people waiting in line and the duration of time of their
wait.

To configure the Queue Analysis:

1. Enter a comprehensive name for the configuration, such as Queue_detect1.
rule type
2. Select the
3. Select a scenario:
3-1. Queue + Service Zone
3-2. Queue only
3-3. Service Zone only
Below is a scenario using both the Service zone and Queue direction box. If you select
the "Queue only" scenario, the Service zone will not be available.
Service zone
The Service zone
to service a customer, and the utilization rate of a service counter.
The Queue direction box
NOTE: Those who standing behind and outside the box will still be counted by camera
firmware. The box is used to designate the possible waiting line direction.
as "Queue Analysis."
Queue direction box
is used to detect service throughput, e.g., how much time is needed
is drawn to detect how many people are waiting in line.
VIVOTEK
User's Manual - 79